کامونیکیتور هارت Communicator HART 375E

کامونیکیتور هارت HART Communicator

کامونیکیتورهای قابل حمل برای کالیبراسیون تجهیزات ابزاردقیق فرآیندی

توانایی برقراری ارتباط هارت با تمام دستگاهها به صورت GENERIC و قابل ویرایش

حدود 150 ساعت کار با 3 عدد باتری قلمی 1.5 ولتی آلکالاین

توانایی شناسای همه دستگاههای روزمونت یوکوگاوا زیمنس کرونه فوجی کوبولد اندرس ….

منوهای بسیار راحت و سریع

سبک و مقاوم

دارای کیف محافظ برزنتی

HART375 HART Hand Held Communicator is a hand held interface based on HART protocol, which could perform configuration, management, maintenance and adjustment to all HART compatible instruments.

HART375 HART Hand Held Communicator can be easily connected into 4~20mA loop, to achieve the configuration of instrument parameters (upper limit and lower limit etc.), the reading of instrument variables, as well as the diagnosis and maintenance of the instrument. This Communicator could support not only the first main device (HART multiplexer etc.), but also the point-to-point and multipoint HART communication modes.

This HART Communicator can interface with an instrument from the control room, the instrument site, or any wiring termination point in the loop through the back connection panel.

کامونیکیتور هارت

Support most of the HART® Instruments:

Rosemount 1151, 3051, 644, 248, 2051

Yokokawa EJA, EJX

SIMENS PDS, DSIII, PS2 valve position, P300, LR200 radar level meter

ABB 2600 series

FOXBORO

etc…

• Support 24V Output: the hand-held device can operate transmitters without an external power supply
• Language support: English, Chinese
• Work hours with battery: 150 hours
• LCD backlight for operation in dark environment.
• Professionally designed for industrial handheld housing, beautiful and robust.

Basic Function: کامونیکیتور هارت

• Inspection-self; the communicator inspects itself when power on, and searches transmitter as well.
• Transmitter and Loop Testing; Testing function verifies if transmitter, interface and loop are working normally.
• Configuration Function; Setting relative parameter for transmitter.
• Parameter Relative to Output; Display 14 units, calibrate 4mA and 20mA setting value, change linearity or evolution output and input damp.
• Parameter Un-relative to Output; Setting transmitter SN, description signal, date, information, indicator type, isolated diaphragm and port material.
• Formatting Function; adding pressure on sensing part to get one relative value, save this value in HART intelligent transmitter electronic circuit’s EEPROM.
• Keyboard Function; Keyboard includes integrated letter keyboard, 6 special function keys and 3 signal keys and conversion key.
• Hand Communicator Connection; the communicator could connect with transmitter through any terminal in control room or local place or loop, but there should be resistor between 250O and 500O. Wiring has no polarity difference, please pay attention that terminal must be connected with transmitter two sides or load resistors’ two sides, but not power’s two sides.

کامونیکیتور هارت